Palbit HiFeed SO10-08 2.00" High-Feed Face Mill – 6-Insert Arbor-Mounted Cutter

The Palbit SO10 D2.00-A.750/1.75-06-08 is part of Palbit’s proprietary HiFeed SO10-08 milling line, designed to deliver outstanding metal-removal rates with minimal cutting forces. Its 10° lead angle and positive +2° geometry allow for aggressive feed rates and stable cutting, even in tough materials.

Built for arbor-mount setups, this cutter features a 2.00-inch cutting diameter and accommodates six SO…0803 inserts, making it ideal for medium-to-heavy high-feed roughing operations on modern CNC machining centers.

• What type of milling operations is this cutter best for?

  A: The Palbit SO10-08 is designed for high-feed roughing and face milling. It excels in high-speed, low-depth cuts that remove large volumes of material quickly. Ideal for mold and die work, aerospace components, and steel roughing operations.

• What materials can this cutter handle?

  A: The SO10-08 series performs well on carbon steels, alloy steels, stainless steels, cast iron, and even high-temperature alloys. Its positive rake geometry minimizes cutting resistance, allowing for longer tool life and better finishes across a wide range of materials.

• What insert does this tool use?

  A: It uses Palbit SO…0803 inserts (standard across the SO10-08 line). These inserts are optimized for high-feed geometry, ensuring smooth chip evacuation and consistent wear patterns.

• What is the maximum depth of cut?

  A: The maximum depth of cut (Ap max) is 0.63 inches (16 mm). Because it’s a high-feed cutter, it’s meant for shallow passes at higher feed rates — not deep slotting.

• What kind of machine setup is required?

  A: This model features an arbor mount with a ¾” bore, which fits most horizontal and vertical CNC milling machines equipped for face milling. For best results, use a rigid setup with sufficient spindle power to handle the feed rates.

• How many inserts does it hold?

  A: It holds six inserts, each contributing to stable and balanced cutting action. The multiple-insert layout helps distribute load evenly, extending both insert and tool body life.

• Can I use this tool for finishing passes?

  A: It’s optimized for roughing, not finishing. However, it leaves a surprisingly smooth surface finish compared to conventional roughing tools — especially when paired with the correct insert grade and parameters.

• Q8: What are the recommended cutting parameters?

  A:

• Feed per tooth (fz): 0.015"–0.035" (depending on material)
• Cutting speed (Vc): 400–850 SFM for steels / 200–450 SFM for stainless / 350–600 SFM for cast iron
• Axial depth (ap): ≤0.63"
• (Always confirm with Palbit’s machining data for specific insert grades.)

• Q9: How does it compare to a traditional face mill?

  A: A traditional face mill uses larger depths and slower feeds, while the HiFeed SO10-08 uses shallow depths and much higher feed per tooth. The result is faster material removal, less vibration, and longer insert life.

• Q10: Is it available in other diameters or mounting styles?

  A: Yes. The SO10-08 line includes diameters from 0.75" to 2.00", and both arbor mount and Weldon shank options are available — ideal for different machine setups and rigidity requirements.

• Q11: Is this a standard stock item or made to order?

  A: Palbit designates the SO10-08 as a stock item, typically available through authorized distributors. For special diameters or shank configurations, lead times may apply.

• Q12: Are replacement inserts and screws interchangeable with other brands?

  A: The insert seat and geometry are proprietary to Palbit’s SO…0803 design, meaning you’ll get the best performance with genuine Palbit inserts. However, some third-party equivalents exist for cost-sensitive applications.

• Q13: How should the tool be stored and maintained?

  A: Keep the cutter body clean and dry between uses, inspect insert pockets for debris or wear, and replace screws periodically to prevent runout or insert pullout at high speeds.

• Q14: Does it require balancing before installation?

  A: All Palbit HiFeed cutters are factory-balanced for standard spindle speeds. However, for very high-speed applications (>15,000 RPM), dynamic balancing is recommended.

• Q15: What documentation or CAD models are available?

  A: Palbit provides 2D/3D STEP files, setup sheets, and cutting data charts upon request via PalbitUSA.com or through authorized distributors like L. Dewitt McCarter.