Description
Bijur Delimon – Meter Unit FSA-00: Slow Flow, Straight Type A
L. Dewitt's SKU #: B1620 | Mfr Part #: B1620The Bijur Delimon B1620 Meter Unit (Type FSA-00) is a precision oil proportioning device designed for Single Line Resistance (SLR) cyclic lubrication systems. Engineered for "Slow" applications, this Straight Type unit mounts directly at the bearing — connecting the system's 5/32" supply tubing to the bearing's 1/8 NPT tap — and ensures that point receives a consistent, metered volume of oil during every pump cycle.
Regulated Slow Flow
As a FSA-00 model, this unit delivers Slow flow, the next step above Extra Slow. It is ideal for smaller bearings and precision slides where only a minimal but consistent oil film is required each cycle. Because each incremental increase in Bijur meter unit size approximately doubles the output, the 00-size is frequently used to fine-tune lower-demand points in a balanced multi-point system.
Cyclic System Integrity
An integrated 5 lb check valve ensures oil flows in one direction only — indicated by the arrow stamped on the hex body — and prevents distribution lines from draining back to the reservoir when the pump is in its off cycle. For cyclic lubrication systems only. Not compatible with continuous-flow pumps.
Technical Specifications
| Type Designation | FSA-00 (Straight Type A) |
| Flow Rate | Slow |
| Inlet Thread | 5/16-24 NF Male (for 5/32" O.D. tubing) |
| Outlet Thread | 1/8 NPT Male |
| Hex Size | 3/8" |
| Overall Length | 61/64" |
| Material | Brass |
Key Features
- 5/16-24 NF inlet for standard 5/32" supply tubing
- 1/8 NPT outlet threads directly into bearing tap
- Integrated 5 lb check valve prevents line drainage
- Stamped type designation on flat hex surface for identification
Common Applications
- Precision Grinders and Lathes
- CNC Vertical Machining Centers
- Bridgeport-style Milling Machines
- Small Automated Assembly Equipment
Technical Support & System Design
Replacing an entire system or just a few points? L. Dewitt McCarter, Inc. is your authorized source for Bijur Delimon technical specifications and replacement parts.
Contact Our Technical TeamAdditional Information
Bijur Part Number: |
B8876 |
Thread Type: |
Inch thread - 5 lb check valve |
Type, Location & Mating Parts: |
Straight Type |
Flow Rate: |
Slow |
