Description
Bijur Delimon DM3 Dualine Valve - 3 Lube Points - with U-81 Fittings
L. Dewitt's SKU #: DM33100T | Mfr Part #: DM33100TWhen a single missed bearing on a critical machine can cost a full shift of production, manual lubrication is no longer good enough. The Bijur Delimon DM Dualine Valve delivers a precise, individually adjustable shot of oil or grease to each bearing point on every cycle - with an indicator stem that confirms operation at every discharge port.
- Reliability & Maintenance Managers who are tired of chasing bearing failures and unscheduled downtime.
- Plant & Lubrication Engineers spec'ing centralized systems that need precise, repeatable, individually adjustable output.
- OEMs & System Integrators building production machinery that ships with a fully integrated lubrication circuit.
- MRO Buyers sourcing direct replacements for legacy Bijur, Farval, or other dualine divider valves.
- Maintenance Technicians & Millwrights who need standard NPT/U-81 fittings and a visible indicator stem to verify operation in the field.
The Bijur Delimon DM33100T is a Compact (DM30 series) dualine divider valve assembly with 3 discharge ports (one port per valve section, bottom), rated to 3,500 psi (240 bar), individually adjustable, and equipped with Brass indicator housing with stainless steel indicator pins. Discharge volume is fully adjustable from .19cc (.012 cu. in.) up to 1.18cc (.072 cu. in.) per piston stroke - per outlet, independent of every other outlet on the block.
How DM Dualine Valves Work
DM valves are fully hydraulic - no springs, no check valves, just a pilot piston and a main piston. Pressurized lubricant from the supply line drives the main piston, discharging a precisely metered shot of lubricant out the bottom discharge port to the bearing. On the next system cycle, the supply pressure reverses and the piston resets - readying the next dose. Each DM valve section has one bottom discharge port per valve, making this style ideal where bearings are oriented under the valve block or where a simpler single-discharge layout is preferred.
Technical Specifications
| Series / Model | DM-3X |
| Lubrication Outlets | 3 discharge ports (one port per valve section, bottom) |
| Bearings Served | 3 bearings |
| Output per Stroke (per outlet) | .19cc (.012 cu. in.) (min) to 1.18cc (.072 cu. in.) (max) |
| Discharge per Adjustment Screw Revolution | .08cc (.005 cu. in.) |
| Total Adjustment Range | 0.56 in (14mm) |
| Max Pressure Rating | 3,500 psi (240 bar) |
| Lubricant | Oil or grease (fully hydraulic operation) |
| Supply Port | 3/8" NPT |
| Discharge Port | 1/8" NPT (bottom) |
| Sealing System | Viton Lip Seals (standard, rated to 350 deg F / 163 deg C) |
| Indicator | Brass indicator housing with stainless steel indicator pins |
| Plug Sealing | 10,000 psi rated Koenig plugs (machining ports) |
| Fittings | Includes Farval U-81 one-piece nut & sleeve fittings |
Why Reliability Teams Choose This Valve
- Stops bearing failures before they start. Every cycle delivers a precise, repeatable shot to every bearing - no missed routes, no operator dependency.
- Verifiable at a glance. Indicator stem on every section confirms the valve is firing - your maintenance tech does not need a stethoscope or a flow meter.
- Tunable per bearing. Each output adjusts independently, so a heavily loaded spindle bearing gets more lubricant than a light idler - without adding hardware.
- No system redesign when scope changes. Add or remove lubrication points by swapping or repositioning valve blocks - the rest of the system is untouched.
- Two moving parts. No springs. No check valves. Fewer wear items, fewer failure modes, longer service life in dirty environments.
- Ships with U-81 fittings included. Drop in and connect - no separate fitting purchase, no parts hunt.
Common Applications
- Centralized dualine lubrication systems on production machinery
- Steel mills, paper mills, cement plants, mining
- Heavy stamping presses and forging equipment
- Conveyor and material-handling drive systems
- OEM lubrication circuits on custom machinery
- Direct replacement for legacy Bijur and Farval dualine valves
Need Help Spec'ing the Right Valve?
Our team can size your full dualine system, cross-reference legacy valves, and quote complete installations. L. Dewitt McCarter, Inc. is your authorized Bijur Delimon source.
Contact Our Technical TeamWarranty Information
Additional Information
Bijur Part Number: |
DM33100T |
Series: |
DM-3X |
Lubrication Outlets: |
3 |
Output per Stroke: |
.19cc (.012 cu. in.) min - 1.18cc (.072 cu. in.) max |
Adjustment per Screw Turn: |
.08cc (.005 cu. in.) |
Max Pressure: |
3500 psi (240 bar) |
Supply Port: |
3/8 in NPT |
Discharge Port: |
1/8 in NPT (bottom) |
Lubricant: |
Oil or Grease |
Sealing: |
Viton Lip Seals (standard, rated to 350 deg F / 163 deg C) |
Indicator: |
Brass indicator housing with stainless steel indicator pins |
Fittings Included: |
Yes - Farval U-81 |
Lead Time: |
40-50 business days |
