Bijur Delimon 20293C Connector Male Barb 1/8 Tubing x M8 x 1

Bijur Delimon 20293C (factory description: CONN MALE BARB 1/8TBG X M8X1). Fittings, adapters, plugs, seals and small connection hardware used to join pumps, junctions, meter units, injectors and tube or hose in Bijur Delimon, Farval and LubeSite lubrication systems.

What you'll also need

• Compression joints: a nut and sleeve sized for the tube OD (B151 p.18–19); nylon tube also needs a tubing insert (p.19, e.g. 19268 for 5N25 tube).
• Straight-thread (BSPP, metric, UNF) ports: a copper seal or O-ring sized to the thread (B151 p.20–21, e.g. M8 20913-6, M10 20913-1).

Before you order

• '1/8FT in a tube listing is tube OD, not 1/8 NPT pipe thread; 1/8IN tube parts use a 5/16-24 compression thread (B151 p.18).
• M8x1 (fine) and M8x1.25 (coarse) are different pitches; B151 lists separate adapters for each (AR215 M8x1, AR102 M8x1.25, p.9).
• Measure the thread; 1/8 NPT, 1/8 BSPT and 1/8 BSPP look alike and B151 lists separate parts and adapters for each (p.9, e.g. 36465-1 1/8BSPT × 1/8NPT).
• Bijur's small threads are easy to mix up: 5/16-24 (5/32IN or 4MM tube), 1/4-28, M8x1 (4MM tube) and M10x1 (6MM tube) (B151 p.18). Check pitch with a gauge.
• Tube sizes in a name are tube OD: '1/4 Tubing' means 1/4IN OD tube, not 1/4 NPT. Measure the tube OD before choosing nut and sleeve (B151 p.18–19).
• Push-to-connect fittings are for nylon tube only, 290 psi / 20 bar max (B151 p.16–17); use compression fittings for metal tube or higher pressure.

Choosing between options

• Many B151 fittings exist in brass, steel and stainless with the same threads, e.g. 1/8IN tube × 1/8 NPT straight: brass 27594-1, stainless 35655-1 (B151 p.10).
• Captive-sleeve brass parts (e.g. nuts 35433, 35531, 35434) have the sleeve held in the nut; standard nuts (B1226, B146, B6531) take a loose sleeve (B151 p.18).
• Bag part numbers are quantity packs of the same part: BB1371 = 25 × B1371, BB1061 = 50 × B1061, 34497 = 10 × 15322 (B151 p.18–20).

Product Documentation