F530611, PM35 Pump 60:1, Air-operated, Grease

(No reviews yet) Write a Review
Condition:
New
Availability:
Y
Weight:
15.00 LBS
Shipping:
Calculated at Checkout
On Sale
  • F530611, PM35 Pump 60:1, Air-operated, Grease
  • F530611, PM35 Pump 60:1, Air-operated, Grease
MSRP: $1,043.12
Now: $930.98
Was: $968.22
— You save $112.14

Description

General

The PM35 Pump is a compressed air-operated reciprocating piston pump designed to pump all types of mineral greases. Suitable for installations with medium length piping to supply up to three grease outlets simultaneously. This pump is mounted directly on 35 lb pails or 120 lb and 400 lb drums.

Operation

This pump is self-priming. To prime it the first time, connect the air supply to the pump while keeping the outlet gun opened and increase the air pressure from 0 to the desired pressure slowly using a pressure regulator. Once grease starts flowing through all the outlets, the pump is primed. The pump starts to pump automatically when the outlet valve is opened. (Note: It is important that the lower valve does not come into contact with contaminated surfaces, such as a workshop floor, as it may become contaminated with dirt or foreign particles that can damage the pump mechanism.)

Installation

To install the pump on the drum, use the included bung adapter. Fasten the cover (part #F1934 for 35 lb pail, part #F1936 for 120 lb keg and part #F1938 for 400 lb drum) onto the container and screw the nut of the F410001 bung adapter into the 2” bung opening of the cover. Insert the pump through the nut and fix it with the star nut to the desired height.

View AllClose

Additional Information

Bijur Delimon Part Number:
F530611
Description:
PM35 Pump
Drum Size:
400 lb
Maximum Air Pressure:
145 psi (10 bar)
Minimum Air Pressure:
20 psi (1.5 bar)
Maximum Fluid Outlet Pressure:
8700 psi (600 bar)
Maximum Delivery @ 80 cpm (cycles per minute):
1.1 lb (500 gr/min)
Air Inlet Thread:
3/8” NPTF
Grease Outlet Thread:
3/8” NPTF
Air Motor Diameter:
3.15” (80mm)
Air Motor Stroke:
3.15” (80mm)
Wetted and seal materials:
Cast Iron / Hard chromed steel / Steel / uhmwpe / nbr /PTFE / Viton®
View AllClose