AM2T2AA2XS, AirMax Pneumatic Pump 115 2X.025 Timer

(No reviews yet) Write a Review
10.00 LBS
Calculated at Checkout
On Sale
  • AM2T2AA2XS, AirMax Pneumatic Pump 115 2X.025 Timer
  • AM2T2AA2XS, AirMax Pneumatic Pump 115 2X.025 Timer
MSRP: $851.93
Now: $760.35
Was: $790.76
— You save $91.58



The AirMax is a simple economical lubricator, ideally suitable for air-oil systems. The AirMax is supplied with a 3 liter reservoir, pressure gauge and oil inlet filter with the options of a oil pressure switch, low level switch, solenoid valve and timer.

The AirMax comes complete with a pumping unit and a integrated air-oil injection system. The required number of oil injectors and the delivery on each port can be selected from the smart number.

The AirMax includes an air actuated, spring return piston pump. The inlet air pressure supply to the pumping element determines the output oil pressure. When used with positive displacement injectors (PDI) the minimum oil pressure should be 260 PSI (18 bar).

For extended service, incoming air must be dry. Always use a suitable FRL unit (filter/regulator lubricator) to control the inlet air supply to the pumping unit (set air to recommended operating pressure). The AirMax pumping unit is cycled using a 3/2-way solenoid valve (Typical cycle; 5 seconds “on” and 30-300 seconds “off”).

A continuous air supply is required to the air-oil injection block and it should be separately regulated to control the air-oil flow rate to the lube point.

View AllClose

Additional Information

Solenoid Valve:
115VAC (2)
Included (T)
Number of Outlets:
2 Outlets (2)
0.025cc (A)(A)
Level Switch:
DIN Connector (2)
Pressure Switch:
None (X)
Flow Rate:
Standard (1.5mm Orifice) (S)
Bijur Delimon Part Number:
View AllClose